Tehnik lazy Daisy

Leave a comment

Teknik ini oleh digunakan untuk membentuk daun kecil

Teknik ini juga bisa digunakan untuk membentuk batang

Teknik Sulam ( Stem Stitch)

Leave a comment

Teknik Sulam( Bunga dari bullion stitch)

Leave a comment

 

  1. Lukis bulatan sebesar penutup pen
  2. Masukkan jarum dari bawah kain
  3. Tarik jarum dan cucukkan semula dalam 3mm
  4. Pusing benang disekeliling jarum sebanyak lebih kurang 25 kali dan tarik perlahan-lahan , kemudian cucuk jarum dibahagian hujung benang.
  5. Ulang teknik sehingga 5 kelopak siap.
  6. Jahitkan manik ditengah2 kelopak.

Tehnik Sulam(rose bullion stitch)

Leave a comment

  1. Matikan benang di bahagian belakang kain
  2. Cucuk jarum ke A
  3. Cucuk jarum ke B dan cucuk semula ke A (lebih kurang 3mm
  4. Lilitkan benang sebanyak 5 kali
  5. Tarik benang perlahan2 dan cucuk semula ke B
  6. Cucuk jarum ke atas sedikit dari A
  7. ulang teknik yg sama sehingga selesai

Macammacam tehnik menjahit Flanel

Leave a comment

1. “Overcast stitch” tehnik ini digunakan untuk menjahit 2 buah kain dengan hasil berpola miring-miring.

2. “Running Stitch” tehnik ini juga digunakan untuk menjahit 2 buah kain namun dengan pola garis setrip-setrip panjang dan dibaliknya berpola garis-garis setrip pendek-pendek.

3. “Gathering stitch” tehnik ini digunakan untuk membuat suatu kerutan pada kain.

4. “Back Stitch” tehnik ini menciptakan pola depan belakang yang sama yaitu garis setrip dengan panjang-panjang yang sama disisi depan dan belakang.

backstitch
5. “Blanked stitch” tehnik ini paling banyak digunakan dalam membuat kerajinan flanel. digunakan untuk menjahit sisi pinggir dua kain atau pun satu kain.
blanket
6. “French Knot” tehnik ini digunakan untuk mematikan simpul agar jahitan tidak copot. dilakukan pada awal pertama menjahit dan akhir jahitan. bisa juga digunakan untuk membuat mata pada boneka flanel atau atau putik bunga pada flanel.
frenchknot
7. “Satin Stich” digunakan untuk mengisi jahitan pada suatu gambar atau pola dalam kain. (seperti mewarnai gambar)
satin
8. “Sewing a Knot” digunakan untuk mematikan simpul lebih kuat.
sewingaknot

Tehnik Jahit Untuk Kreasi Flanel

Leave a comment

Teknik jahit yang bisa digunakan dalam pembuatan produk flanel atau felt dapat dilakukan dengan mesin jahit maupun tangan. Namun, jahitan tangan lebih banyak digunakan karena mudah dan fleksibel. Ada banyak sekali jenis tusuk hias yang biasa diterapkan pada flanel/felt, tetapi beberapa teknik sederhana yang paling sering digunakan diantaranya:

1. Tusuk jelujur / baste stitch

Merupakan teknik paling sederhana dan mudah. Biasanya digunakan untuk membuat serutan atau menyatukan 2 lembar kain agar tidak bergeser saat dijahit. Jahitan ini tidak terlalu kuat sehingga mudah diurai kembali.

2. Tusuk Tikam Jejak.

Jenis tusuk hias ini digunakan untuk membuat garis, batang/tangkai pohon dll.
3. Tusuk Rantai / Chain stitch
 
4. Tusuk Daun/ Leaft stitch
Biasanya digunakan untuk membuat bentuk daun, tetapi dapat juga dengan bentuk lain sesuai dengan pola yang digambar di atas kain.
5. Tusuk Feston Terbuka/ Open Festoon Stitch
 
Digunakan untuk merapikan bagian tepi kain felt.
6. Tusuk Festin Ganda/ Double Direction Festoon Stitch
feston stitch dan roll stitch

(Sumber: http://feltsouvenir.blogspot.com/2012/01/jenis-tusuk-hias.html#ixzz21KMCCxd6)

Tusuk Flanel
Tusuk ini juga  sering digunakan dalam berkreasi dengan felt/flanel
Fungsi:
– ngehias bagian pinggir kain
– ngehias dan ngejait bagian tengah kain (contohnya untuk pembuatan Soft Book)

Tusuk Batang
Disebut juga Tusuk Tangkai
Fungsi:
– sesuai namanya yaitu untuk membuat batang / ranting / tangkai
– bisa juga digunakan untuk mengisi pola yang kita kehendaki

Tusuk Batang
Tusuk Bunga

Fungsinya jelas untuk membuat bunga :D

Tusuk Bullion
Tusukan yang menuruk ika rumit hehe
Fungsi:
– membuat buliran2 kecil yang kemudian membentuk bunga dan bentuk lainnya

Sumber: http://flanelhuis.wordpress.com/201102/14/aneka-tusukan/

Hand sew felt using blanket stitch

Leave a comment

Sewing two pieces together (and how to stitch around a corner)

(1) Place the wrong-sides of the felt layers together.Take your knotted floss and go from the inside of the front layer through to the outside. The knot should be sandwiched between the two layers with your floss coming out of the front layer.
(2) Insert the needle to the left of where the floss is coming out of the front piece.
(3) Pull the floss through most of the way, then put your needle through the loop from the back to the front.Pull the first stitch so it is a little loose.  You will need the loose floss to complete the last stitch.  See next image for reference.
(4) Insert the needle to the left of your last stitch.
(5) Pull the floss through most of the way, then put your needle through the loop from the back to the front.  Pull this stitch (and all subsequent stitches) tight so the vertical bar is straight up and down.Continue across using step 4 and 5.
(Corner 1) Make the last stitch before the corner so your needle goes in right where the inner corner of a square would be if you made a square from the corner.  See inset in image for clarification.
(Corner 2) Insert needle into same place as last stitch.
(Corner 3) Complete stitch so that bar is diagonal from the needle insertion point to the corner.
(Corner 4) Insert needle into the same place as the last two stitches.
(Corner 5) Complete stitch so that the bar is perpendicular to the first corner stitch.Continue across using step 4 and 5.
(6) Finish the last stitch before you need to join to the beginning.
(7) Place your needle under the vertical bar of the first stitch.
(8) Insert your needle in the back piece of felt so the tip comes out between the pieces of felt at the top (see next image for reference).  Your needle should go in the back piece where the stitch would normally come out.
(9) This is the same step as the last one, just a different view to show you how the needle is going in through the back piece and coming out between the felt pieces at the top.
(10) Pull tight.  This is why the first stitch needs to be a little loose, because it becomes a right angle in this step.  The stitches should all look right now.Place your needle under the back bar you just created and make a knot.
(11) This is the completed knot.
(12) Insert your needle between the felt pieces and have the end come out somewhere else on your piece.  Pull the thread through and tug a little to bury your knot between the felt pieces.
(13) You’re done!

How to start if you aren’t going all the way around

(1) This is a technique I use when I’m doing just a little bit of blanket stitch, such as the bottom edge of this jellyfish.Place the wrong-sides of the felt layers together.

Take your knotted floss and go from the inside of the front layer through to the outside. The knot should be sandwiched between the two layers with your floss coming out of the front layer.

(2) Insert your needle in the back piece of felt so the tip comes out between the pieces of felt at the top (see next image for reference).If you are stitching the edging on a single piece of felt, put your needle through the starting knot in this stage.
(3) Pull the floss through to tighten stitch.  The thread should be coming out from between the felt layers to the left of the stitch.
(4) Put your needle under the first stitch on from right to left.
(5) Pull the needle through.  There is now a loop around the top of the first stitch.
(6) Continue blanket stitch according to instructions above (step 2). When you start the blanket stitch this way, the first stitch stays vertical.

Sewing an edging (and tips for round objects)

(1) Insert your needle from the back of the piece so it comes out the front.
(2) Insert the needle to the left of where the floss is coming out of the front piece.
(3) Pull the floss through most of the way, then put your needle through the loop from the back to the front.Pull the first stitch so it is a little loose.  You will need the loose floss to complete the last stitch.

If you are stitching around a circle, make this stitch VERY loose.  You will need lots of extra floss to complete the last stitch.

(4) You will make your stitches following step 4 and 5 above.  When stitching around a circle keep your stitches straight by holding the circle so your stitch is at the top and imagining your stitch continues down the circle through the center. The red arrow is your imagination.
(5) Here is the next stitch and it’s blue imaginary arrow.  See how the red and blue arrows cross in the center of the circle?  All of your stitches should point toward the middle.
(6) Complete the edging by putting your needle under the vertical bar of the first stitch.
(7) Pull tight.
(8) On the back, put your needle through the initial knot.
(9) Make your final knot.
(10) You’re done!

What to do if you run out of floss in the middle

(1) Knot your floss at the top of the last stitch.
(2) Insert your needle (threaded with knotted floss) into the knot you just made and pull until the new knot is against the knot you just made.  Both should be hidden between the pieces of felt.
(3) Insert your needle into the felt to the left of your last stitch.
(4) Complete the stitch as normal.

Sumber: futuregirl.com

%d bloggers like this: