Cut out the pieces of felt required:
- 1 long strip to make a sleeve for the headband – measure the width of the headband, double it and add an extra 5mm for stitching. Measure the length and do the same.
- the large part of the ear – Cut a piece of paper to the correct shape and use that as a template. You will need 4 of these per headband.
- the small inner section of the ear – as above, however you will only need 2 of these per headband.
Stitch the long sides of the sleeve together using an over-edge stitch (either using the sewing machine or by hand). Pull the sleeve over the headband, fold the ends over and stitch by hand.
Stitch the inner ear to the outer ear. Then stitch the back and front of each ear together. Use a couple of strands of embroidery thread.
Put a small amount of stuffing in each ear. This is to help the ears stand up and fill them out a little so they don’t flop over when stitched to the headband.
Stitch each ear to the sides of the headband. Stitch as close to the edge of the headband as you can. If you stitch the back and front of the headbands close together the ear will most likely flop.
Felt Christmas House – Tissue Box
- Tissue box 9″ (23 cm) x 5″ ( 12 1/2 cm)
Felt – brown 20″(51cm) x 24″(61cm)
White 12″(30 1/2cm) x 24″(61cm)
Green 4″(10 cm) x 3″(7 1/2cm)
Gold 6 1/4″(15 1/2cm) x 3″(7 1/2cm)
This Christmas craft project shows you how to make a beautiful Christmas house Tisse box cover. You can use any small box.
Cut out all your box pieces out of card, you will not need a bottom to your box.you will need to cut away the perforated section of the box and will need to be kept open even when you are covering it , as you will need to still pull the tissues out, only then it will pull through the chimney.
Now cut the same pieces out of brown felt ( or what ever colour you would like your house to be) leave a 1/2″ (1cm) allowance, glue the felt to the card and turn the (1cm) over and glue to the back.
Once you have done all your pieces (5) glue the edges together (hold in place with pins) until secure.( you can stitch the pieces together if you prefer).compleat the house section, before going on to the roof.
Cut out your Christmas tree from the green felt, decorate with beads,fabric paint or tinsel.
Glue it to the end of your house.
Window- cut your window out of gold felt, then a second window out of wall colour with the window panes cut out, glue this on top of your gold piece, now glue it to the front of your house to one side slightly.cut your candle out and arrange it to sit in one of the windows, glue it in place.
Cut out a green door and glue it in place, you can either use a bead or a tiny circle of felt for the door knob.i made a tiny wreath for the door,I cut a circle out of dark green and decorated it with dots of fabric paint, quite effective.
Now cut out the door canopy from card,and cover it with white felt, position it over the door
Pin it in place until secure.
Cut your roof and gable ends from a piece of card ( cut your roof in one piece ).find the center and then cut out you chimney section, Next cut you gable ends out of brown felt, do not forget the 1/2″ turn over allowance, glue on to the card, once it is dry, glue them onto your roof at the position stated on the direction sheet.
Make sure it sits just on the top of the tissue box ,once it all feels secure, cut out and glue your white felt on the roof,leaving enough allowance for a snow fall, front and back and both ends, (do not glue the roof to the walls) cut the chimney section out again.now cut out your second piece of roof (in felt only). It would be much easier to cut your chimney section out now before you glue it in position, now to cut out your chimney use your picture for directions cut it out of card then out of brown felts when it is completed , you can begin to put your snow around the top.
Now glue the chimney in place last of all is the roof window, cut the window out of card then cover the sides in brown , white on top ( with a small allowance for snow fall) and gold on the front then a second front out of brown felt with the panes cut out.
You can now glue your window snow on. Put your house over your tissue box and Thread your tissue up and through the chimney. If you want to keep little fingers out you can attach it at one end then put a button and elastic loop at the other end